Archive / current issue
Category: Resilience
Critical spares, redundancy, recovery drills, and operational readiness.
-
3–4 minutes
Building the Sensor Stack: What to Actually Instrument on MEP Equipment Before You Call It “Predictive”
A failure-mode-based guide to vibration, thermal, oil and fluid, and power-quality monitoring—and the baselines and CMMS controls needed before calling a program predictive.
-
2–3 minutes
Time-Based vs. Condition-Based vs. Predictive Maintenance: Choosing the Right Model per MEP System
A practical framework for selecting time-based, condition-based, predictive, or hybrid maintenance according to each data-center MEP component’s actual failure behavior.
-
3–5 minutes
Predictive Maintenance for AI Hyperscale Data Centers: From Preventive Calendars to Condition-Based Control
Why AI hyperscale facilities need a closed predictive-maintenance loop connecting failure modes, sensors, known-good baselines, alerts, and actionable CMMS work orders.
-
3–5 minutes
Commissioning Roadmap for AI Hyperscale Data Centers
A practical commissioning roadmap for AI hyperscale data centers—linking scope, testing, deficiency closure, and operational handoff into one evidence-driven control process.
-
1–2 minutes
Operations and maintenance is where commissioning either holds or slips
The handoff is not the finish line. Operations and maintenance decide whether the commissioning baseline survives the first months of use.
-
1–2 minutes
How an EOP stabilizes abnormal conditions without creating new risk
EOPs are for abnormal conditions: contain, escalate, recover, and document.
-
1–2 minutes
How AI hyperscale teams turn SOP, MOP, and EOP into controlled execution
The operating model matters more than the document stack: SOPs define routine work, MOPs control change, and EOPs stabilize abnormal conditions.
-
1–2 minutes
From feed failure to recovery: the workflow that keeps data centers out of firefighting mode
The safest way to handle a one-side electrical feed failure is to run a short, repeatable workflow that keeps the site stable, preserves options, and verifies recovery.
-
1–2 minutes
What to check after one electrical feed fails: the power, cooling, and controls sequence
A feed loss is not only an electrical event. It can change the operating margin of power, cooling, and controls, so the next step is to inspect what is now exposed.
-
2–4 minutes
What to do in the first 60 minutes after one electrical feed fails in a data center
A single electrical feed loss does not have to become an outage. The first hour should focus on confirmation, load protection, redundancy checks, escalation, and documentation.
Data Center Health 